Makita DLX2131JX1 18V LXT Li-ion 2 Piece Combi Drill & Impact Driver Set with 3 x 3.0Ah Batteries
The Makita DLX2131JX1 is an 18v twin pack that is part of the Makita LXT range. It includes the DHP482 hammer drill driver, the popular DTD152 impact driver, 3x 3.0Ah 18v Li-ion batteries and the DC18RC fast charger.
Description
DHP482 The Makita DHP482 cordless hammer drill is a popular choice among many tradesmen, it delivers an astonishing amount of power considering its lightweight build and design. A variable speed trigger is fitted as standard to give as much control possible and the electric brake will stop the chuck spinning almost immediately after the trigger has been released. It features forward and reverse rotation that can be easily changed with he use of the switch slide, this is located just above the variable speed trigger and it’s ergonomic soft grip that ensures maximum comfort. The DHP482 also has a built in LED job light so when pressure is applied to the trigger your working area will be illuminated. DTD152 The Makita DTD152 18V impact driver is a huge asset to the Makita LXT range. It is mainly used to secure and loosen light/medium duty screws, this is often achieved without drilling a pilot hole prior. The variable speed trigger and electric brake allows for maximum efficiency ensuring the correct speed is obtained, and that the rotation is put to a halt as soon as the trigger has been released. The DTD152 has a compact and lightweight design so small spaces are no issue and the soft grip gives user comfort even after a full days use. An LED job light is featured so in darker areas like kitchen cupboards are made visible.
Key Features
DHP482
- Electric Brake
- 2 mechanical gears
- Variable speed control by trigger
- Forward/reverse rotation
- Twin LED job light
- Ergonomic soft grip
- Keyless chuck
- Compact and lightweight design
- Equipped with Battery protection circuit: designed to protect the barrery from damages due to overdischarge, high temperature or overload current
- Metal gears
DTD152
- Electric brake
- Variable speed control by trigger
- Forward/reverse rotation
- Twin LED job light
- Ergonomic soft grip
- Compact and lightweight design
- Equipped with Battery protection circuit: designed to protect the barrery from damages due to overdischarge, high temperature or overload current
- High rotation speed
In the Box
- 1x DHP452 Combi Drill
- 1x DTD152 Impact Driver
- 3x BL1830 3.0Ah Batteries
- 1x DC18RC Fast Charger
- 1x Type 3 Makpac Carry Case
- 2x Belt Clips
DHP482
- No Load Speed (Lo): 0 - 600 rpm
- Capacity in Masonry: 13 mm
- Capacity in Steel: 13 mm
- No Load Speed (Hi): 0 - 1,900 rpm
- Capacity in Wood: 38 mm
- Blows per Minute (Lo) – ipm: 0 - 9,000 ipm
- Blows per Minute (Hi) – ipm: 0 - 28,500 ipm
- Chuck Capacity: 1.5 - 13 mm
- Voltage: 18 v
- Torque Settings: 21 + drill
- Battery Type: Lithium-ion
- Vibration K factor: 1.5 m/sec²
- Noise sound pressure: 82 dB(A)
- Noise sound power: 93 dB(A)
- Noise K factor: 3 dB(A)
- Net weight: 1.5 - 1.8 kg
- Max. Fastening Torque (Soft Joint) : 36 Nm
- Max. Fastening Torque (Hard Joint) : 62 Nm
- Vibration: Impact drilling into concrete : 6.0 m/sec²
- Vibration: Drilling into metal : 2.5 m/sec²
DTD152
- Voltage: 18 v
- Standard Bolt: M5-M16
- High Tensile Bolt: M5-M12
- Coarse thread (length): 22 - 125 mm
- Max Fastening Torque: 165 Nm
- No Load Speed: 0 - 2900 rpm
- Battery Type: Lithium-ion
- Vibration: Fastening Bolt: 10.5 m/sec²
- Vibration K factor: 1.5 m/sec²
- Noise sound pressure: 93 dB(A)
- Noise sound power: 104 dB(A)
- Noise K factor: 3 dB(A)
- Net weight: 1.3 - 1.6 kg
- Driving Shank: 6.35mm (1/4") Hex
- Machine Screw: M4-M8
- Impacts per Minute: 0 – 3,500 ipm
Warranty
As standard Makita offer a 1 year manufactures’ warranty on machines from the date of purchase
The 1 year warranty can be extended to a 3 year warranty* with online registration
All Makita products are thoroughly inspected before they leave the factory to ensure they meet the highest of standards but on rare occasions a machine may develop a defect, if this happens, don't worry, Makita's warranty system is one of the best around.
Makita services agents are located across the country and will be able to repair a faulty machine under warranty. Use this tool to find your nearest agent: Makita Dealer Locator.
If a suitable dealer can not be located then the Makita returns form can be used to arrange a free of charge collection of your machine for inspection by Makita.
*Please note:
- Registration for Makita's extended 3 year warranty is only available within 30 days of the purchase date.
- 3 year warranty is not available for Batteries, Battery Chargers, Accessories, Petrol Powered Products, Production Tools and Air Tools and Compressors.
- When filling out the 'Makita Dealer' section of the 3 year warranty form please enter 'J CARR & SON LTD'.
- As well as providing a 3 year warranty certificate, proof of purchase will also be required, so please keep your receipt.
*This guarantee does not apply where:
- Repairs have been made or attempted by others.
- Repairs are required because of normal wear and tear.
- The tool has been abused, misused or improperly maintained.
- Alterations have been made to the tool.
- This guarantee does not affect your statutory rights.
Delivery
- We aim to despatch all power tool orders processed before 2pm on the same day for a next day delivery.
- We offer free delivery on all power tool orders over £99.
- Parcels with a cost of up to £150 are sent via Royal Mail on a first class Signed For service that is delivered next day 98% of the time, this includes Saturdays.
- Parcels with a value of over £150 are sent on a next working day, pre 12pm delivery service with DPD.
